Carbon Brushes Replacement For DeWalt DW705 DW708 - 145323-06 145323-03 145323-02 (2 Pack)

About This Product

DeWalt DW705 and DW708 owners, if your miter saw or power tool is sparking excessively, losing power, or just not running as smoothly as it used to, these carbon brushes are likely exactly what you need to get it running like new again. This 2-pack includes the replacement brushes you need, sized at 0.75 x 0.5 x 0.25 inches, which are direct replacements for part numbers 145323-02, 145323-03, and 145323-06. Replacing worn carbon brushes is one of the most common power tool repairs, and it's usually pretty straightforward if you're comfortable with basic tool maintenance. The brushes I received fit perfectly into my DW708 miter saw - no modification needed, just remove the old ones and slide these new ones into place. The quality seems good - proper carbon composition, good spring tension, and they're making solid contact with the commutator. After installation, my saw immediately ran smoother and quieter with much less sparking visible through the vents. The 2-pack is convenient because you can replace both brushes at once (which you should always do), and you'll have a spare set ready for next time. Installation typically requires removing a couple of screws on your tool's housing, so make sure you unplug the tool first and work carefully. If you're not comfortable doing it yourself, any tool repair shop can handle this quickly. So if your DeWalt miter saw or similar tool is showing signs of brush wear, this affordable replacement set can extend your tool's life significantly. It's way cheaper than buying a new tool or paying for professional repair, and it's satisfying to fix it yourself.