10 Inch Concrete Grinding Disc With Diamond Segments - Compatible With Edco, Husqvarna Floor Grinders

About This Product

If you're working with concrete floors, this 10-inch grinding disc is seriously tough. The 20 arrow-shaped diamond segments are hand-welded for durability and aggressive material removal. It works on most major grinder brands like Edco, Husqvarna, MK, and Blastrac models that take 10-inch plates with 3/8-inch bolt holes. The 30/40 grit with medium bond is perfect for grinding down concrete surfaces and removing thin coatings like epoxy, paint, mastics, or waterproofing materials. You can use it wet or dry, which gives you flexibility depending on your job site setup. The plate itself is 10mm thick with segments that add another 8mm, so it's built to handle some serious abuse. What I appreciate is how it maintains consistent performance without wearing down too quickly. The universal bolt pattern means you probably won't need adapters or special hardware to fit your machine. It's not meant for super thick coatings though - for those, you'd want a PCD plate instead. But for standard concrete prep and coating removal, this thing chews through the work efficiently. The diamond quality is noticeable - you get smooth operation without excessive vibration. Whether you're a contractor or DIYer tackling garage floors, basement concrete, or commercial spaces, this grinding disc will save you time and effort. Just make sure your grinder can handle 10-inch plates before ordering, especially if you have an older model.